C & N Machined Components

Machined Components

Min Qty.	Service/Component	Description
1 Off	Tornado 200	2 Axis Machining, Bar Feeder capable of Machining Capability up to 66 mm Diameter
1 Off	Tornado 120 MS	4 Axis Machining, 12 Station turret (all driven) with sub spindle, Programmable bar feeder, Machining Capability up to 66 mm Diameter
1 Off	Tornado T8MS	4 Axis Machining, 12 Station turret (all driven) with sub spindle, Programmable bar feeder, Machining Capability up to 66 mm Diameter. Lights out and integrated renishaw probing enables 24/7 unmanned machining.
2 Off	Tornado T8MSY	6 Axis Machining, 12 Station turret (all driven) with sub spindle, Programmable bar feeder, Machining Capability up to 66 mm Diameter. Machines are capable of orbital milling, off centre drilling & tapping with Y Axis movement +/-40 mm. Lights out and integrated renishaw probing enables 24/7 unmanned machining.
1 Off	Haas Mini Mill	Milling Small Components unable to process through the lathe facility. Table Travel = 16” x 12” x 10”
1 Off	Automated Wash Facility	Hot wash and Air Dry of Components.
1 Off	Doosan Daewoo Puma 2000SY	6 Axis Machining, 12 Station Turret (All Driven) with sub spindle and programmable bar feeder. Y Axis Machining with a Maximum Turn Diameter of 330mm, Maximum length of 510mm and a Maximum bar Diameter of 65mm.
1 Off	Doosan Daewoo Lynx 220B CNC Lathe	2 Axis Machining, 12 Station Turret with programmable bar feeder. Maximum Turn Diameter of 320mm, Maximum length of 305mm and a Maximum bar Diameter of 51mm.

Measuring Equipment

• Verniers & Micrometers
• Height Gauges
• Radius Gauges
• Thread Ring
• Gauges
• Thread Plug
• Plug Gauges

For the Aerospace Industry we currently produce:

• Washers
• Adaptors
• Conical Closures
• Screws
• Nuts
• Bolts
• and many more...

As well as carrying excess stock in Round Bar in the following grades:

• Grade 660 A286
• Z30 C13
• Z6 CNDT 17-12
• Z8 CNDT 17-12
• Z2 CN 18-10
• Nimonic 80a

Contact us if you have any raw material requirements in this area.

For more information on our Machining Capabilities please visit www.machinability.co.uk

• Machined Components

© C & N International Units 2-3 Wansell Road Weldon North Industrial Estate Corby Northants UK NN17 5LX
Telephone: 00 44 (0) 1536 400 254    Fax: 00 44 (0) 1536 400 866    Email: graham@cnmetals.uk.com
VAT No: 638 637 700    Company Reg No: 4052422

Accessibility    Terms and Conditions    Sitemap